Weboldalunk használatával jóváhagyja a cookie-k használatát a Cookie-kkal kapcsolatos irányelv értelmében.
Menu

MAMBA STACK F405 MINI MK2 /30A 5S 8BIT/400MW VTX VTX

Price:
62.57 EUR
Manufacturer:
Model: DIAT_MB-STACK-F405MINIMK2-F30 MINI-TX400
Qty:db

Description

Specification:

Item Name: MAMBA Stack F405 MINI MK3.5 30A 5S 8BIT ESC

Flight Controller:

MAMAB Basic F405MINI MK3.5
MCU: 168MHz STM32F405RGT6
GYRO: MPU6000
Barometer: Yes
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 5 Set
ESC Soft: Dshot300/600
Power Led: Yes
LED Controller: BF LED
RSSI: Yes
Buzz: Yes
Input: 2~6S Lipo (8.4~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A&  5V 2.5A
MOUNTING: 20mm, M2

ESC:
MAMBA F30 MINI ESC
INPUT VOLTAGE: 2~5S Lipo (8.4V~21V)
CONTINUE CURRENT: 30A×4
BURST CURRENT: 40A (10S)  
BEC: No
Target:BLHeli_S CH40
SOFT: Dshot300/600
TVS Protection: Yes
MOUNTING: 20mm, M2

Features:

Fixed

1. Add I2C function

2. When you connect the USB, the receiver and OSD settings can be saved

3. Increase the pad area

4. LED signal selection (when Mamba Led sys avaiable)

5. BEC short circuit protection

6. TVS instant high voltage protection 30V

Update

1. F405 models support F.prot(Most)

2. Upgrade the anti-interference cable

3. Use Typec(Most)

4. The pad area of Mini flight controller (20×20) increased by 140%

Added

1. Add self-recovery insurance to the receiver's 5V power supply

2. Increase the camera VCC power supply pad

3. Standard flight controller (30.5×30.5) adds spare pad

4. Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference          

Parameters

Antenna connector IPEX (u.FL)
ESC firmware BLHeli S
DJI HD support no
OSD yes
Mounting pattern 20x20 mm (micro)
IMU MPU6000
Radio frequency 5.8 GHz
Steady current 30 A
voltage 3-6 cell (11.1V-22.2V)

Package included

1 x MAMBA STACK BASIC F405 MINI MK3.5 30A 5S 8BIT
1 x High-Frequency 470uF/35V 
2 x 8pin sh1.0  
2 x 16AWG 60mm 
AMASS Original XT30        

Reviews

There are no reviews for this product.
Write a review!