Walksnail Avatar VRX + 1S Avatar kit
| Manufacturer: |
|
| Model: | WN_VRX_1S_KIT |
|
|
|
Description
Lightweight design, ultra-thin experience
Walksnail VRX only 83g and comes with 114*55*22mm size, easy to carry.
Walksnail VRX adopts 4 antenna design, 2 directional antennas, the maximum transmission distance is 4km
1080P/60FPS
Walksnail VRX adopts industry-leading H.265 encoding technology,
which can provide a minimum delay of 22ms and a maximum resolution of 1080p.
The HD picture quality takes you to experience the fun of flying a drone.
HDMI output ensure you to enjoy uncompressed audio and video signals from the Walksnail HD system
Canvas Mode
Supports betaflight full OSD display,supports betaflight, inav, kiss full osd display
you can easily adjust the parameters you want by remote control.
| Specification | |
| Camera | |
| Model | Avatar nano/Avatar camera |
| Image Sensor | 1/2.7”1nch |
| Resolution | 1080P/60fps,720P/120fps,720P/60fps |
| Ratio | 16/9 4/3 |
| Lens | 2.1mm |
| FOV | 170° |
| Aperture | F2.0 |
| Shutter | Rolling shutter |
| Min.Illumination | 0.001Lux |
| Weight | 3.5g/6g |
| Dimensions | 14*14*17mm/19*19*22mm |
| Coaxial Cable | 90mm/140mm |
| VTX | |
| Model | Avatar module |
| Communication Frequency | 5.725-5.850GHz |
| Transmitter Power (EIRP) | FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm |
| 1/O Interface | JST1.0*6(Power in)JST1.0*4(USB) |
| Mounting Holes | 25.5*25.5mm |
| Dimensions | 33*33*9.5mm |
| Storage | 8G |
| Recording | 1080p/720p |
| Weight | 16g |
| Operating Temperature | -20-40℃ |
| Channels | 8 |
| Wide Power Input | 6V-25.2V |
| Supported FC System | Betaflight |
| OSD | Canvas mode |
| Latency | Average delay 22ms |
| Antenna | 2(IPEX) |
| Goggles Antenna | |
| Model | Red bird |
| Polarization | LHCP |
| Bandwidth | 5.6GHz-6.0GHZ |
| Average Gain | 1.9dBi |
| Radiation Efficiency | ≥97% |
| VSWR | ≤1.3 |
| Cross-Polar Rejection | -15to-30dB |
| Connector | RP-SMA |
| Dimension | H24.8mm*R15.3mm |
| Weight | 4.2g |
| Avatar HD VRX | |
| Model | Avatar HD VRX |
| CommunicationFrequency | 5.725-5.850GHz |
| TransmitterPower(EIRP) | FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;MIC:<25dBm |
| I/OInterface | HDMI,microSDcardslot,DC5.5*2.1mm |
| HDMIOutput | 1080p60fps,720p100fps,720p60fps |
| PowerInput | 7-21V(2S-5S) |
| SDCard | Support256G |
| System | AvatarHDsystem |
Package included
1 x Avatar 1S Kit
1 x 4 Pin USB Cable
1 x 6 Pin Power Cable
2 x M2x3/4mm Screws
4 x M2x16mm Screws
4 x M2 Screw nut
5 x 2.1x3.4x1mm Gasket
Reviews
1s Walksnail kit works well. I built it into an 85mm whoop. 33g without battery, with a 550mAh battery approx. The flight time is 5 minutes in slow motion. I put 0802 engines in it for the sake of low weight. Of course, you can't push it at a race pace, but it's perfect for a leisurely pace in an apartment.